• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. B

    MEP-806 - burnt circuit board, looking for replacement

    Ok, I see the confusion (it's my fault) from the OP, I want a replacement board, not a replacement IC. That was my bad from the OP, so if anyone has a complete spare board, complete spare screen/ monitor assembly please PM me.
  2. B

    MEP-806 - burnt circuit board, looking for replacement

    Guys, please, un-helpful commentary is really a waste of electrons. I don't want to be rude but we need parts, not sympathy or completely erroneous suggestions. One Good Soldier PMed with a link to parts cheap. There are literally thousands of these generator being surplused - half of them half...
  3. B

    MEP-806 - burnt circuit board, looking for replacement

    Thanks, looking for replacement - a part number would be great.
  4. B

    MEP-806 - burnt circuit board, looking for replacement

    Looking for replacement and diagnosis of burnt IC on board - let me know if you have a replacement and if anyone knows the reason it failed. Thanks,
  5. B

    MEP-806B control board for fuel solenoid and excitation - assistance request

    I'm pleased to say with just your encouragement - we got it to work! Basics, like holding the start switch longer for the excitation to take place after the speed switch is up to speed. Only with Military units do regular generator technicians say they are burnt up because they don't know to...
  6. B

    MEP-806B control board for fuel solenoid and excitation - assistance request

    This is new unit to us just purchased at auction. We have a customer that wants to use it for wood mill and we need to get it running properly. On some generators you can manually do excitation to get the field sense voltage and see if the AVR starts and the alternator produces power, that...
  7. B

    MEP-806B control board for fuel solenoid and excitation - assistance request

    So we have the engine cranking and starting by cleaning connections; runs fine and the governor and other green lights are on except for Field Sense, the AVR does not seen to light up and excite nor maintain power. The other issue is the digital display back light is not lighting up the screen...
  8. B

    MEP-806B control board for fuel solenoid and excitation - assistance request

    So we are trouble shooting the board that control the fuel solenoid relay and also excitation. Our engine runs well when we bypass the control board for the fuel solenoid but we lack the DC power light, solenoid connection and excitation. Attached are photos of the board and a tag - can anyone...
  9. B

    Manual Glow Plug Install

    So just trying to confirm - 12 volt CUCV glow plugs on manual control have a maximum of 2 minutes before they likely burn out? I've found that my truck starts best with 20-30 seconds of glow plug when cold - trying to make sure I'm not going to ruin them with to much time. One 6.2 I did the glow...
  10. B

    CUCV hard starting, surge at idle . . . have tried several things

    I had some of these symptoms and it turned to be old fuel. All issues but long crank to start disappeared after draining tank and replacing with fresh fuel. Only issue I'm struggling with now is I have to crank it 15 plus seconds with my foot in the pedal before it starts after sitting. In the...
  11. B

    Hard starting CUCV's

    Can someone clarify if when removing and filter and housing with a spin on - does some form of check valve need to be put in? I have the hard starting (crank for long time then starts - with foot in pedal) symptom but I pulled the whole filter housing and replaced it with a Cummins spin on...
  12. B

    M944A1 Mobile Shop Civilian Conversion

    So it should have three wires - each hot plus a chassis ground. I am looking for 1308 parts as I also picked up another M944A1 - the lathe tailstock was missing. If you decide to part out the lathe we are interested. Sangha Energy.org
  13. B

    Drash Isuzu 4LE1 engine issue

    photos please So please do a quick photo and upload - we need to reconnect back to factory. Glad to hear you got yours running - hopefully we'll be there in a few days!
  14. B

    Drash Isuzu 4LE1 engine issue

    Drash Isuzu diesel side shots Is this the same Isuzu pictures attached? Can you post side shots of yours? Isuzu makes a great diesel if we can get them back to original setup.
  15. B

    Untrash the DRASH - Isuzu diesel

    So we got this DRASH unit in and it is trashed. WTF - I want to ask but probably don't want the answer - how can a machine with 27hrs on it get disassembled and trashed? Don't answer - we don't have time for that. Here are some photos - what I need to know is what is missing from the Isuzu...
  16. B

    MEP 952 diesel generator

    So whatever happened? 3000rpm unit per specs - 70db at 24 feet - APU like the MEP-903 which was f-in loud. Who ran one on their camper and got divorced?
  17. B

    Wreck waiting to happen M944A1 recovery

    Let me know if you know any M944A1s that are being parted out - I need some PTO to generator parts. Also, I have a machinist that can fix the Southbend 1308 lathe slides - we have found two that were abused and damaged - hard to get parts for now. We rebuild the slides and have one extra lathe...
  18. B

    M944a1 roof attachments

    There for mounting solar panels;)
  19. B

    why late model MEPs being surplused?

    Anyone know why late model 2009-2010 MEPs are being surplused out when only five or so years old? Typically they have a 20 plus years surplus sale time frame. I'm thinking of the MEP-903s that were surplused early because of noise and other design issues. We did six of those 903s and they all...
  20. B

    Essex A698A Reactive AC Load Bank manuals wanted

    Interesting reactive load bank but can't find any documentation. Anyone? 60kvar and they talk reactive - so inductive loads? oooo,aaahhh,ooooo,,,ahhhh
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks