Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Does anyone know the bolt size for a 1009 alternator, specificly the driver side alt. the is on the firewall side? I can get a 16mm socket on it but i read somewhere it should be a 13 mm. I have cranked on the bolt and the spacer is seperating a bit. I know this is a starter thread but ive...
Has anyone installed a Katz circulation tank heater in their M1009? Can it be done correctly? I purchased one of these units and it is not working properly. If anyone has any input that would be great a pic of your installation would be better yet. Thanks in advance yellas.
I just pulled the starter today to have it rebuilt. I noticed that I don't have the shield on mine. anyway, I disconnected the batteries first, then I had to disconnect a smaller red wire which appeared to have been connected to a blade terminal and it runs up the back side of the engine.
Now...
Kinda stupid question, but are there just the 5 grease fittings up front on the m1009? I searched the 2320 and only seen the 2 on the driverside and 3 on the passenger. for some reason I thought there were more.:confused:
This just happened out of the blue this morning: started M1009 ok, turned on the heater fan and the Gen 1 light came on but no heater blower. I know to check the fuses when I get back home but the question is, why did this happen. If I remember correctly, I read a post somewhere that stated...
My neighbor recently purchased a m1009 that has been converted to all 12 volt. He askedme what the com port under the dash was for and I told him. Then then question was posed: Will the ste-ice work on his now 12 volt truck?
I would guess not due to himonly having (1) alt., (1) battery or am I...
Has anyone ever converted the old style hmmwv light toggle swith to the new touch style. I guess I should say swapped out. Do the wires still connect the same way. I am trying to replace the left lower toggle or find a new one, the lower broke off and the headlights wont work without it...
After replacing the dash bulbs and dash panel, I accidently touched the voltmeter to something and it sparked and now will not work. I know, "always disconnect the batteries when working on electrical", but I had a brain fart. I remember reading somewhere how to do a simple "fix" but I can't...
While watching American Pickers Monday evening, I spotted a M1008 that was parked on the street at one of their stops near the "Hollywood" sign. Just wondering if it was someone's from here.
I came across this product while searching for "automotive screws". I believe the "Max-nut" would work very well for mounting antenna hardware and the like. I know I had a heck of a time getting riv-nuts (thanks 319 for the assist on them) I just thought I would post this in hopes of helping...
I won my M1009 in November, my EUC was approved the 2nd. week in Feb. and pick up was 4 day's after. On 03-10-10 I recieved my SF97 along with a Florida Title :confused: Went to the County Title Office and was told I needed to have the Vin# verified and vehicle inspected. This was done at a...
Ok, I was at it again today couldn't leave well enough alone. Here are my problems: I replaced all dash lights and used steel wool on the copper contacts and got everything nice & clean; re-assembled and now I have dash lights.
Now the problem: I lost use of the voltmeter, gas gauge won't...
Got a question? Today I was tinkering. I pulled the instermment panel off to check bulbs. As I was putting the panel back in place, I noticed a small grey wire off dangleing. I believe it came off the light bulb socket for the voltmeter but it looked like it simply broke off or pulled out. I let...
Making a recovery trip to Wright Patterson this week, I'm willing to take addtl. photos for anyone who has a future recovery there if you would like, just send me a p/m with what I'll be looking for.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!